The setting tool used with the HDI-P is designed to leave a mark on the lip of the anchor to allow an inspector to determine that the HDI-P has been set properly. The HDI-P has a lip that allows for flush installation and ensures consistent anchor depth. The shallow embedment requirement cuts down drilling time for fast installation.

HDI-P Short Drop-in Anchor – specifically designed for use in hollow core panel, precast and post tension concrete applications where maximum embedment requirements equal 3/4”.

The use of a setting tool is required for each of the five diameters of HDI concrete anchors.

HDI SS 303 Drop-in Anchor – manufactured from 303 stainless steel, meets the same wide variety of applications and allows shallow embedment without sacrificing holding power and can be set below the surface of the concrete.

A setting tool is required to set the HDI into the concrete. There are five diameters of HDI: 1/4”, 3/8”, 1/2”, 5/8” and 3/4”, and each diameter of HDI is manufactured in one length.

HDI Drop-in Anchor– manufactured from carbon steel and zinc plated, meets a wide range of application requirements, allows shallow embedment and setting below the surface of the concrete.

There are five different types of HDI drop-in anchors, each of which are designed for specific applications:

Hilti drop-in anchors are a female anchor that require a setting tool to be used to set the HDI in the concrete before inserting a bolt or threaded rod. Hilti drop in anchors referred to as HDI, are a drop-in anchor designed for use in solid concrete.

Hilti anchors for tekla